Saturday, July 22, 2017

How Hackers Redirect Web Traffic with DNS Spoofing

LIKE MY FACEBOOK PAGE Click here

What is DNS?

This question is actually fairly simple. DNS stands for Domain Name System. You know when you go to a website using a browser, you type in a URL instead of the IP address of the server? That’s DNS working it’s magic! What DNS does is it keeps track of what IP addresses reside at what URLs, that way we don’t have to remember the addresses, just the URLs! Pretty neat, huh? Like I said, DNS is fairly simple, so let’s move on to the next part, the anatomy of a DNS spoofing attack.

Anatomy of a DNS Spoofing Attack

Since this can be a bit difficult to talk about without a reference, we’re going to be dissecting this attack based on this diagram:


As we can see here, the attacker starts by pretending to be the DNS server. Then, when the victim requests the address for the desired site, the fake server responds with whatever address the attacker wants, which in this case, directs the victim to a fake site. This attack is very simple, but can often play a part in a larger attack. Now that we know the ins and outs of DNS spoofing, let’s perform it ourselves!

Performing a DNS Spoofing Attack

Setting up the Attack

Before we really get started, there are a couple of things that we need to prepare. Namely, we need to prepare the fake website, and set up the configuration file for the DNS spoofing tool.
Let’s start by setting up the website. First, we’ll whip up some basic HTML code so we actually have a site. We’ll be using gedit. The proper file can be opened with the following command:
Now that we have our file open, just go ahead and erase everything in it. I’ll be replacing it with the following:
Feel free to replace the words with whatever you like, as long as you follow the HTML tags, everything should be fine.
Now that we have our website’s HTML code ready, we can go ahead and start the server that will serve the website. We’ll just be using the pre-installed Apache2 webserver, which can be started with the following command:
Now that we have the site up and running, we need to quickly edit the configuration file for the DNS spoofing tool. We’re just going to be modifying the /etc/hosts file and using it for our attack. We can open the file with the same command we used previously, but with the new file path. Once we have the file open, we can set up the file to tell the spoofing tool what sites we want to spoof. Before we do that, we need to know our local IP address, which we can find with the ifconfigcommand:
We can see that our local IP address is10.0.0.16. Now that we know it, we can edit the file. We’re just going to be adding this line:
We can see by the above output that the address of the gateway is 10.0.0.1. For the sake of keeping this relatively short, we already have our victim’s address, which is 10.0.0.13. Note that all these addresses are on the same network. This form of DNS spoofing only works if the victim is on your LAN. Now that we have the addresses, we can start the Man in the Middle attack (finally)! We’re going to be usingarpspoof for this attack, and we’ll be using the -i-t, and -r flags to specify the interface to attack on and the addresses to attack:
Once we execute this, the MitM will start.
DO NOT FORGET: You must enable IP forwarding, so the data from the victim doesn’t get hung up on the attacking system. This can be done with this command: echo 1 > /proc/sys/net/ipv4/ip_forward
Now that we have our MitM running, we should have all the victim’s traffic flowing through the attacker system. Since we can see all this traffic, we can start the DNS spoofing tool (dnsspoof) to listen for DNS requests forwww.criminalscity.blogspot.com and respond to them with our IP address! Let’s go ahead and start dnsspoof now. We use the -i flag for giving an interface, and the -f flag for giving the path to the hosts file. The command to start the attack should look something like this:
We can see that dnsspoof is now listening for UDP traffic on port 53 (port 53 is the DNS port, and UDP is the transport protocol DNS uses) from all address but our own! Now that our attack is up and running, let’s move over to our victim PC and try Criminalscity.blogspot.com
There are multiple reasons for this article. For one, we’ll be needing these attacks very soon in order to steal passwords from an unsuspecting user. Secondly, it’s a proof of concept of sorts. It shows that these smaller attacks (MitM, DNS spoofing, etc.) aren’t just one trick ponies. We can combine these attacks to achieve even greater things. Many times, when performing an actual hack, you will need to combine many different kinds of attacks at once to achieve a goal, this just proves that. I’ll see you next time

No comments:

Post a Comment

C Program to Print its Own Source Code

Ever wondered how to write a  C program to print its own source code ? Well, here is the source code of a C program that when executed w...